Type selection according to LED display specifications

There are many LED display specifications, such as P1.25, P1.66, P2, P2.98, P4.81, P5.91, P3(indoor), P5 (outdoor),P8 (outdoor), P10 (outdoor) and so on.

The spacing and display effect of different sizes are different, and should be selected according to the situation.

Select according to LED display brightness

The brightness requirements of indoor LED display and outdoor LED display are not the same, such as indoor requirements greater than 800cd/m, semi-indoor requirements greater than 2000CD/M2;

Outdoor requirements brightness greater than 4000cd/m or greater than 8000CD/M2, the general outdoor LED display brightness requirements will be higher, so in the selection of particular attention to this detail.

Select according to the proportion of LED display

The length to width ratio of the LED display will directly affect the viewing effect, so the length to width ratio of the LED display is also an important factor to be considered in the selection. General graphic screen has no fixed proportion.

Mainly combined with the content to be displayed to determine, and the video screen is more common length to width ratio is generally 4:3.

Select according to LED display refresh rate

The higher the LED display refresh rate, the more stable and smooth the picture will be, our common LED display refresh rate is generally higher than 1000 Hertz or 3000 Hertz,

So when you choose the LED display, you should also pay attention to its refresh rate is not too low.

Otherwise, it will affect the viewing, and sometimes there are water ripples and so on.

Select according to LED display control mode

Our common LED display control methods include WIFI wireless control, RF wireless control, GPRS wireless control, 4G full Netcom wireless control, 3G(WCDMA) wireless control.

Automatic control, timing control and so on. Each person can choose the corresponding control mode according to the needs.

Select by LED display color

LED display can be divided into monochrome screen, two-color screen or full color screen, among which LED monochrome display is only one color of the light screen, the display effect is not very good; LED two-color screen is generally composed of red + green led diode, LED full-color display is rich in color, can present subtitles, pictures, etc.;

Can display a variety of pictures, videos, subtitles and so on. At present, LED two-color display and LED full-color display are used more. How to choose LED display

Indoor LED refers to large and medium-sized LED display equipment used indoors, for example, bank counters, supermarket promotional activities display cards and so on. These devices can be seen. The area of indoor led display is mostly from one square meter to more than ten square meters. The luminous point density is higher, and the performance is slightly decreased compared to the outdoor led display.

Outdoor led display refers to outdoor display, high product brightness, which is dozens of times higher than indoor led display. Putting an indoor LED display outside is like putting a TV outside without enough brightness. Therefore, the outdoor LED display must use ultra-high brightness leds, and in order to further improve the brightness and increase the visual distance, many ultra-high brightness leds are often packaged in a pixel. At the same time, the outdoor LED display must be protected against (rain) water, direct sunlight, dust, high temperature, wind, lightning, etc., while the indoor LED display does not need to consider these issues.

Type selection according to LED display specifications

There are many LED display specifications and sizes, such as P0.9, P1.2, P1.5, P1.8, P2.5, P3, P4 and other indoor models, but also P5, P6, P8, P10 and other outdoor models. The spacing and display effect of different sizes are different, and should be selected according to the situation.

Select according to the ratio of LED display length and width

The length to width ratio of the LED display will directly affect the viewing effect, so the length to width ratio of the LED display is also an important factor to be considered in the selection. Generally, there is no fixed ratio of the graphic screen, mainly combined with the display content to determine, and the more common length to width ratio of the video screen is generally 4:3, 16:9 and so on.

Select by LED display color

LED display can be divided into monochrome screen, two-color screen or full color screen, among which LED monochrome display is only one color of the light screen, the display effect is not very good; The LED two-color screen is generally composed of 2 red + green LED diodes, which can display subtitles, pictures, etc. LED full color display is rich in color, can present a variety of pictures, videos, subtitles and so on. At present, LED two-color display and LED full-color display are used more.

LED display a variety of models available, according to customer display environment and other different use scenario requirements, you can choose from P0.9 - P4 indoor and P5-10 outdoor different pitch LED series products.

At the same time, it has high-definition picture quality, using high-quality small-pitch LED lamp beads, with high contrast, full and rich colors, fine and vivid colors, using highly integrated high gray level and high refresh display technology, 16bit processing system to 65536 levels of gray, can constitute 281 trillion colors; The high-speed refresh rate can reach more than 3840 Hz, which can be fully adapted to high-speed cameras and high-definition television transmission needs.

LED display has a high-quality module, using modular display unit module design, can be any direction, any size, any shape seamless splicing; Waterproof and dust-proof, easy to disassemble and install, but also easy to maintain.

Using RGB three-color imaging technology, the color gamut is wide, reaching the broadcast grade standard, and the color temperature of the screen can be adjusted to 3000-12000K after single point brightness and chroma correction.